Mercedes-Benz GLE 500e Plug-in

For EV Chargers & Cables, see "Products for Mercedes-Benz GLE 500e Plug-in". 

Overview:

The Mercedes-Benz GLE 500e Plug-in has a 8.8 kWh battery, powering it to a real world range of 12 miles. The Mercedes-Benz GLE 500e Plug-in uses the Type 2 charging standard, which is used for all charging requirements. The Mercedes-Benz GLE 500e Plug-in has no rapid charging capabilities. The Type 2 inlet is used when charging at home or at public slow and fast AC points. The Mercedes-Benz GLE 500e Plug-in`s charging inlet can be found on the right side - rear.

Slow / Fast: Type 2

Max AC 1-phase rate: 3.7 kW Max AC 3-phase rate: 3.7 kW

The Mercedes-Benz GLE 500e Plug-in is capable of both slow and fast charge speeds. Slow charging occurs via a 3-pin-to-Type 2 cable, while fast charging will require a Type 2-to-Type 2 cable, one of which may be included with your vehicle when first purchased. Alternatively, a tethered charger can provide fast charging.

To charge your Mercedes-Benz GLE 500e Plug-in, the driver will plug the connector into the inlet. The car communicates with the charging unit to ensure that the connection is not faulty, verify the power supply, and that it is safe to begin charging. Home chargers/workplace chargers will not require any additional actions, the vehicle will begin charging automatically.

On the other hand, public chargers will require an activation process – this may be in the form of an RFID card or app. Alternatively, pay-as-you-go chargers would require the user to present their contactless card. The vehicle will start charging automatically, after verifying connectivity and account checks.

How long does it take to charge a Mercedes-Benz GLE 500e Plug-in?

The Mercedes-Benz GLE 500e Plug-in features a 1-phase 3.7 kW onboard charger for Type 2 AC charging. The on-board charger may have a higher, 3-phase capability but this is not useful when charging at home, because the vast majority of household electrical supply’s are 1-phase. Connecting to a fast charger that has an output higher than 3.7 kW is not a problem, however, the Mercedes-Benz GLE 500e Plug-in will only be able to charge at up to 3.7 kW. The following table shows approximate time to charge an Mercedes-Benz GLE 500e Plug-in, which accepts power up to 3.7 kW AC. Times are for a 100% charge.

Furthermore, please note that figures shown above are a guide. There are a variety of factors that may impact the charging time for your Mercedes-Benz GLE 500e Plug-in – for starters, charging from 0% should be a very rare occurrence, meaning charge times are not entirely indicative. Other factors include temperature, current charge in the vehicle, as well as safety restrictions mentioned above which protect your battery life.

Costs of charging a Mercedes-Benz GLE 500e Plug-in:

Costs for charging a Mercedes-Benz GLE 500e Plug-in, with a standard 8.8 kWh battery, are shown in the table below. Please note that these figures are estimates and depend on factors such as battery capacity and health, age of the battery, and current remaining charge. They also assume a standard tariff of 28p/kWh for home charging.

Public-network charging for Mercedes-Benz GLE 500e Plug-in:

Public EV charge points are widely available in the UK. Some charge points are free to use, however, most require payment. Payment method varies between networks, however most require an account to be set up before use, with access being provided through either an app or RFID card provided by the network.

Recently, networks have begun installing contactless card readers, meaning some charge points may not require an account and app/RFID card to be used.

Charging tariffs are comprised of a connection fee (usually a flat rate), cost per charging time, and/or cost per energy consumed.

Home Charging for Mercedes-Benz GLE 500e Plug-in:

The Mercedes-Benz GLE 500e Plug-in features a Type 2 connector, meaning you will need a Type 2 home charge point, or a 3-pin-to-Type 2 cable. Vorsprung offers the following solutions:

• Smart Wallbox Type 2
• Wallbox Type 2
• Untethered
• 3-Pin to Type 2

The Vorsprung Smart WallBox Type 2 is a tethered charge point for your home, with an output of 7.4kW at 32A. The Smart Wallbox features an app that connects to your charge point, allowing for scheduled charging, different charge modes, and more!

The Vorsprung Wallbox Type 2 features all the same features with the key exception of the app integration. Simple and straightforward, it is a plug-and-play solution.

The Vorsprung Untethered Socket is a Type 2 socket – this solution is great for those who already have a cable, or those who charge on public networks frequently, as it allows for you to use one cable for both public and home charge points. The Vorsprung Untethered Socket outputs up to 7.4kW.

The Vorsprung 3-Pin to Type 2 Charger is the traditional home-charger solution – simply plug it in to your standard UK-3-Pin outlet! The Vorsprung 3-Pin to Type 2 Charger features an amperage selector, meaning you can choose between 6A through 13A for charging.